performed by unauthorized
may result in misplacing
of internal wires and components,
which could cause a serious hazard.
1. Tool service MUST BE performed only by a Sears Service Center.
Service or maintenance performed by unqualified personnel could result
in a risk of injury.
NOTE: All service that requires opening the saw should only be
performed at a Sears Service Center.
2. When servicing a tool, ALWAYS use only identical replacement parts. Follow
instructions in the Maintenance Section of this manual. Use of unauthorized
parts or failure to follow Maintenance Instructions may create a risk of electric
shock or injury.
Reciprocating Saw has been properly lubricated
and is ready to use.
1. In two to six months, depending
on use, take your tool to the nearest Sears
Service Center for a complete cleaning,
inspection and lubrication.
2. Tools used constantly
on production jobs will need lubrication more often.
3. Tools that haven't been used for long periods of time should
be lubricated before you use them.
USE ONLY IDENTICAL
To avoid accidents,
tool from the power source BEFORE cleaning