Sync; Input Signal Display - Panasonic TH-42PD12U Operating Instructions Manual

SYNC

Select SIGNAL from the "SET UP" menu during RGB input signal.
Press to select the "SYNC".
Press to adjust.
Setting RGB sync signal
Confi rm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT
signal).
AUTO: The H and V sync or synchronized signal are automatically selected.
If both input, it is selected the H and V sync.
ON G: Uses a synchronized signal on the Video G signal, which is input from
the G connector.
VBS: Uses a synchronized signal of Composite Sync input, which is input
from the HD connector.

Input signal display

Displays the frequency and the type of the current input signal.
This display is valid only for COMPONENT/RGB/PC input signal.
Display range:
Horizontal 15 - 110 kHz
Vertical 48 - 120 Hz
SET UP for Input Signals
SIGNAL
SYNC
3 : 2 PULLDOWN
XGA MODE
SYNC
SYNC
SYNC
H-FREQ.
V-FREQ.
SIGNAL FORMAT 1280×1024/60
[ RGB ]
AUTO
OFF
AUTO
AUTO
ON G
VBS
63.98 kHz
60.02 Hz
39