SET UP for Input Signals
3D Y/C FILTER
Select "SIGNAL" from the "SET UP" menu during VIDEO (S VIDEO) input signal mode.
("SIGNAL [VIDEO]" menu is displayed.)
Press to select the "3D Y/C FILTER (NTSC)".
Press to set ON / OFF.
Note:
When ON, this setting only affects NTSC input signals.
COLOR SYSTEM
Select SIGNAL from the "SET UP" menu during VIDEO (S VIDEO) input
signal mode.("SIGNAL [VIDEO]" menu is displayed.)
Press to select the "COLOR SYSTEM".
Press to select each function.
If the image becomes unstable:
With the system set on Auto, under conditions of low level
or noisy input signals the image may in rare cases become
unstable. Should this occur, set the system to match the format
of the input signal.
COLOR SYSTEM:
Set the color system to match the input signal. When "AUTO" is set, COLOR
SYSTEM will be automatically selected from NTSC/PAL/SECAM. However, M.NTSC
signal may not be displayed properly. To display M.NTSC signal, select "M.NTSC"
in COLOR SYSTEM.
AUTO
PAL
36
– For NTSC AV images
SECAM
M.NTSC
NTSC
3D Y/C FILTER (NTSC)
ON
[ VIDEO ]
SIGNAL
3D Y/C FILTER (NTSC)
ON
COLOR SYSTEM
AUTO
3 : 2 PULLDOWN
OFF