Panasonic TH-42PD12U Operating Instructions Manual page 42

Options Adjustments
Item
Off:
Studio W/B On:
Note: Valid only when the low is set as color temperature on screen adjustment.
Sharpens the contrast for a better view when a part of the image is too light to see.
Off:
Studio Gain On:
Note: This setting is valid only when the input signals are as follows:
Off
You can set the power-on delay time of the displays to reduce the power load, when you press
on the multiple displays that are set together, for example, on MULTI DISPLAY system.
Set each display's setting individually.
Off:
Power On Screen
1 to 30 (sec.): Set the power-on delay time (second).
Delay
Notes:
• During this function is working, the power indicator is blinking green.
• This function also works when the power recovers from failure or after plugging off and in again the power
cord.
Sets All Aspect mode (advanced aspect setting) or default aspect mode.
With each press of
Off:
On:
All Aspect
Aspect mode of each setting is as follows:
(Example: HD signal)
Off
On
Sets the operational mode of the automatic position adjustment in the POS./SIZE menu.
Manual: Automatic position adjustment starts when
Auto Setup
Auto:
Off:
Rotate
On:
Normalization
When both main unit buttons and remote control are disabled due to the "Button lock", "Remocon User level" or "Remote
ID" adjustments, set all the values "Off" so that all the buttons are enabled again.
Press the button on main unit together with
"Shipping" menu is displayed and the lock is released when it disappears.
42
Nullify all the settings adjusted.
Sets the color temperature for TV studio.
Disables "Studio Gain".
Enables "Studio Gain".
Component Video, RGB
1 2 3.... 30
The display will be turned on at the same time as
After pressing , the display will be powered on with time delay depending on this setting.
button, the aspect changes in the selected mode.
Default aspect mode
All Aspect mode
4:3→H-FILL→ZOOM→FULL→JUST
4:3 (1)→4:3 (2)→4:3 Full→Zoom1→Zoom2→Zoom3→16:9→14:9→Just1→Just2
adjustment is executed from the POS./SIZE menu.
Other than remote control or menu operation, automatic position adjustment starts:
When the display power is turned ON.
When the input signal is switched.
Does not rotate the image.
Rotates the image 180 degrees.
button on the remote control and hold for more than 5 seconds. The
Adjustments
is pressed.
is pressed on the remote control or automatic position
to turn