Signal Menu; 3D Y/C Filter - Panasonic TH-85PF12U Operating Instructions Manual

SIGNAL menu

Note:
"SIGNAL" setup menu displays a different setting condition for each input signal.
1
2
3
4

3D Y/C FILTER

Select "SIGNAL" from the "SET UP" menu during VIDEO (S VIDEO) input signal mode.
("SIGNAL [VIDEO]" menu is displayed.)
Note:
When ON, this setting only affects NTSC input signals.
Press to display the SET UP menu.
Press to select the "SIGNAL".
Press to display the SIGNAL menu.
Press to select the menu to adjust.
Press to adjust the menu.
Press to exit from adjust mode.
– For NTSC AV images
Press to select the "3D Y/C FILTER (NTSC)".
Press to set ON / OFF.
SET UP for Input Signals
For VIDEO (S VIDEO)
[ VIDEO ]
SIGNAL
3D Y/C FILTER (NTSC) ON
COLOR SYSTEM AUTO
3 : 2 PULLDOWN
OFF
Panasonic AUTO (4 : 3) 4:3
REFRESH RATE
100 Hz
NOISE REDUCTION OFF
For COMPONENT
[ COMPONENT ]
SIGNAL
3 : 2 PULLDOWN OFF
XGA MODE AUTO
REFRESH RATE 100 Hz
NOISE REDUCTION
OFF
H-FREQ. 63.98 kHz
V-FREQ. 60.02 Hz
SIGNAL FORMAT 1280×1024/60
SET UP
SIGNAL
SCREENSAVER
EXTENDED LIFE SETTINGS
COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL PC
POWER SAVE OFF
STANDBY SAVE OFF
POWER MANAGEMENT OFF
AUTO POWER OFF
OFF
ENGLISH ( US )
OSD LANGUAGE
Press ACTION ( ) button
For RGB
SIGNAL
SYNC AUTO
3 : 2 PULLDOWN
XGA MODE AUTO
REFRESH RATE 100 Hz
NOISE REDUCTION
H-FREQ. 63.98 kHz
V-FREQ. 60.02 Hz
SIGNAL FORMAT 1280×1024/60
For Digital
SIGNAL
3 : 2 PULLDOWN
REFRESH RATE 100 Hz
NOISE REDUCTION
H-FREQ. 63.98 kHz
V-FREQ. 60.02 Hz
DOT CLOCK FREQ. 108.0 MHz
SIGNAL FORMAT 1280×1024/60
3D Y/C FILTER (NTSC) ON
1/2
[ RGB ]
OFF
OFF
[ Digital ]
OFF
OFF
51