GE PGSS5PJZASS Owner's Manual And Installation Instructions page 28

Installation Instructions
REMOVING THE
@
[]
D
DOORS
{Double Door Refrigerator Models only){cont.)
REMOVE THE REFRIGERATOR
DOORS {cont.)
Remove the hinge cover on top of the
refrigerutor door bg removing the Phillips heGd
screws and pulling it up.
Using G 5/16 socket ratchet/driver, remove the
bolts securing the top hinge to the cabinet. Then
lift the hinge strGight up to free the hinge pin
from the socket in the top of the door.
Hinge Cover
Remove the tape and tilt the door GwGg from
the cGbinet. Lift the door off the center hinge
pin. Ensure that the pl(sstic hinge pin thimble
remains on the hinge pin or inside door hinge
pin hole located in the bottom of the door.
FG1 set the door on a non-scratching surface with
the inside up.
r21 REMOVE CENTER HINGE
Using G 5/16 socket ratchet/driver, remove the
bolts securing the center hinge to the cabinet.
Set the hinge Gnd bolts aside.
[] REMOVE OPPOSITE DOOR
Follow the same procedure on the opposite
door. There are no wires, wGter lines or center
hinge covers on the opposite side.
[] REMOVE FREEZER DRAWERS
Refer to the Removing the Freezer Drawers
section for instructions.
28