Installation
Instructions
REPLACING THE FREEZER DRAWERS
Two people may be required to complete
this procedure.
TOP DRAWER
_] ATTACH AND SECURE THE DRAWER
FRONT TO THE SLIDES
r_
Pull out the rail assemblies
to the full length on
each side of the cabinet.
_]
\
Drive the bottom
outside screw into the drawer
on each side until it is all the wag in.
©
Drive the remaining
3 screws on each side
all the wag into place (there are a total
of 8 hex-head
screws).
Screws
[]
REPLACE THE FREEZER BASKET
Tilt the basket back and lower it down into
the drawer. Rotate the basket to a horizontal
position and press it down into the 4 alignment
tabs on the rails.
25