Download Print this page

For Recycling - Craftsman 315.274790 Owner's Manual

Variable speed / reversible professional 3/8 in. cordless drill-driver

Advertisement

BATTERIES
Your drill's battery pack is equipped with 15 nickel-
cadmium rechargeable batteries. Length of service
from each charging will depend on the type of work
you are doing.
The batteries in this tool have been designed to
provide maximum trouble free life. However, like all
batteries, they will eventually wear out. De not
disassemble
battery pack and attempt to replace the
batteries. Handling of these batteries, especially when
wearing rings and jewelry, could result in a serious
burn.
To obtain the longest possible battery life, we suggest
the following:
Store and charge your batteries in a cool area.
Temperatures above normal room temperature
will shorten battery life.
Never store batteries in a discharged condition.
Recharge them immediately after they are
discharged.
All batteries gradually lose their charge. The
higher the temperature
the quicker they lose their
charge. If you store your tool for long periods of
time without using it, recharge the batteries every
month or two. This practice will prolong battery
life.
To preserve natural resources, please
recycle or dispose of properly.
This product contains nickel-
cadmium batteries. Local, state or
federal laws may prohibit disposal of
nickel-cadmium
batteries in ordinary
trash.
Consult your local waste authority for information
regarding available recycling and/or disposal options.
BATTERY
PACK REMOVAL
AND
PREPARATION
FOR RECYCLING
_i
WARNING:
Upon removal, cover the battery
pack's terminals with heavy duty adhesive tape.
Do not attempt to destroy or disassemble battery
pack or remove any of its components. Nickel-
cadmium batteries must be recycled or disposed
of properly. Also, never touch both terminals with
metal objects and/or body parts as short circuit
may result. Keep away from children. Failure to
comply with these warnings could result in fire
and/or serious injury.
OVERLOAD
Your drill has a built-in overload protector to protect the motor during overloading or prolonged use. The
overload protector automatically
activates to break the circuit. When this occurs, allow your drill to cool a few
seconds before resuming operation.
14

Advertisement

loading