Including Legs; Cross Support Bar - Craftsman 320.16491 Operator's Manual

KNOW YOUR MITER SAW STAND (Fig. 1)
Fig. 1
Extension bar Cross support Locking lever
locking knob bar Roller
assembly
Q
mounting brackets
Frame assembly
including legs
Roller-locking
knob
PRODUCT SPECIFICATIONS
Height 32-7/8 inches
Extended width 80 in.
Maximum Load Capacity 330 Ibs
Weight 32.6 Ibs
,_ WARNING: If any parts are broken or missing, do not attempt to operate the
stand until the broken or missing part is replaced. Failure to do so could result in
possible serious injury.
,_ WARNING: Do not attempt to modify this stand or create accessories not
recommended for use with this stand. Any such alteration or modification is misuse
and could result in a hazardous condition leading to possible serious injury.
UNPACKING
* Carefully remove all the parts and accessories from the carton. Make sure
that all items listed in the packing list are included.
* Inspect the stand carefully to make sure that no breakage or damage
occurred during shipping.
16491 Manual_Revised_12 0606 Page 7