GENERAL
SAFETY
RULES
,_
WARNING:
Read all safety warnings and instructions. Failure to follow the
warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings
and instructions
for future
reference.
READ AND SAVE THESE iNSTRUCTiONS
,_
WARNING:
Do not modify this tool and/or used it for any application
other
than that for which it was designed.
•
Know your stand.
Do not attempt
to assemble
or operate your stand until
you have read the safety instructions
in this section.
Only use your stand
on a hard, dry and fiat surface.
=
Do not load the stand
with more than 330 ibs.
=
Do not stand
or climb on the
stand,
it could tip over causing serious injury.
=
Do not permit children
to use the stand
unsupervised,
it is not a toy.
=
Be sure all locking pins are in the set=up position holes before
using
your power tool and stand.
•
Unplug
your power tool before
moving
or repositioning
it.
=
Always
firmly
attach
any bench top tool used with this stand.
Do not
attempt
to use your stand until the bench top tool is fastened firmly.
=
Always
keep all guards in place. Be sure all power tool guards are in good
working
order and are in proper adjustment
and alignment.
=
Always
keep your hands away from the cutting
area.
Page 6
16492
ManuaLRevised_12
0528