Advertisement
2.
Position your miter saw with
non-standard
mounting
holes
on the cross support
bars (C).
Check the position
and adjust
the support
bars slowly so
that the mounting
holes on
the miter saw are aligned with
the slots on the cross support
bars (Fig. 11).
3.
Use the four mounting
bolts
(D), washers (E), self-locking
washers
(F) and locking
nuts
(G) to securely tighten the saw
to support
the bars (C).
4.
With the miter saw mounted on
the mounting brackets, place it
onto the stand (Fig. 12).
5.
Attach the brackets
to the
stand. See Installing the
Quck-Release
Mounting
Brackets
section.
Fig. 11
Fig. 12
\
16492
Manual_Revised_12
0528
Page 13
Advertisement
