Install The Header Bracket - Craftsman 139.53678SRT Owner's Manual

Installation Step 2 I
Install the Header Bracket
You can attach the header bracket either to the
wall above the garage door, or to the ceiling.
Follow the In=tructlons which will work best for
your particular requirements.
Fasten the Header Bracket to the Wall
• Center the bracket on the vertical guideline with
the bottom edge of the bracket on the horizontal
line as shown (with the arrow pointing toward the
ceiling).
• Mark either set of bracket holes (do not use the
holes designated for ceiling mount). Drill 3/16" pilot
holes and fasten the bracket securely to a structural
support with the hardware provided.
__ Header _
WaR
-I
Highest
Point of Tnlvel
(ofGarage Door)
Door
Vertical
Center
Une
Hardware Shown Actual Size
II!12
5/18"-g_1-5/8"
Fasten the Header Bracket to the Ceiling
• Extend the vertical guideline onto the ceiling as
shown.
• Center the bracket on the vertical mark, no more
then 6" from the wall. Make sure the arrow is
pointing toward the wall. The bracket can be
mounted flush against the ceiling when clearance
is minimal.
• Mark holes designated for ceih'ngmount only. Drill
3/16" pilot holes and fasten bracket securely to a
structural support with the hardware proVided.
CeilingMountingHol_
Wall
0
rml ho_ Is for posi_ocdng only,
You muet UN lag =CleWS to mount
the header btacke_
14