GE Profile DPSE810 Owner's Manual page 10

About reversing the door.
Reversing the Door
Tools needed:
• Standard #2
Phillips screwdriver
• Tope-tipped
putts knife
)
F_l Open the door and remove the filler plugs opposite the hinges. With the door
completelu open, remove the bottom screw from each hinge on the druer face.
Insert these screws about half way into the TOP holes, for each hinge, on the
opposite side (where 9ou removed the filler plugs). Applu firm pressure to get
the screw started in new holes.
_l Loosen top screw from each hinge on the drger face half way. With one hand
holding the top of the door and the other hand holding the bottom, remove
the door from the dryer bg lifting it UP and OUT.
/\
9.
F_l Rotate the door 1807Insert it on the opposite side of the opening bg moving
the door IN and DOWN until the top hinge and the bottom hinge are resting
on the top screws inserted in step 1.
_l Remove the remaining screws from the side of the opening from which the door
was removed. With these screws, secure each hinge at the bottom. Tighten the
two top screws of each hinge. Reinsert the plastic plugs on the side from which
the door was removed,
!0