GE Profile DPSE810 Owner's Manual page 5

About the control panel-for model DPSE810. go.cam
• Cleon lint filter • Add clothes
Step 3
• Select Drg Cgcle
Step 4
• Shut door
• Push START
NOTE: When making a selection with any knob, simply point the knob anywhere within the shaded range
for that setting.
Model DPSE810
OPTmONS TEMPERATURE DRYNESS
START
0
STOP/PAUSE
.-. .,a_
About the control settings.
mEnd of Cycle Signal
This signal will sound just before the end of the cucle to remind Uou to remove the clothes,
If you select the EXTENDED TUMBLE option, the signal will sound at the end of the druing time and will sound
several times during the EXTENDED TUMBLE cycle. This will remind Uou that it is time to remove the clothes.
NOTE:
• Remove garments promptlu at the sound of signal. Place clothes on hangers so wrinkles won't set in.
• Use the END OF CYCLESIGNAL especially when druing fabrics like polyester knits and permanent press.
These fabrics should be removed so wrinkles won't set in.
Extended Tumble
Use this option to minimize the wrinkles in clothes. It provides approximatelg 1 hour of no-heat tumbling after
the clothes are dry.
If you are using CYCLESIGNAL and you select the EXTENDED TUMBLE option, a signal will sound at the end
of the drying time and several times during the EXTENDED TUMBLE cycle. This will remind you that it is time
to remove the clothes.