IMPORTANT SAFETY INFORMATION.
READ ALL INSTRUCTIONS BEFORE USING.
,& WARNING!
WHEN USING YOUR DRYER (cont.)
• Never attempt to operate this appliance
if it is damaged, malfunctioning, partially
disassembled,or has missing or broken parts,
including a damaged cord or plug.
• The interior of the machine and the exhaust duct
connection inside the dryer should be cleaned at
least once a year by a qualified technician. See the
Loading and Using the Dryer section.
• If yours is a gas dryer, it is equipped with an
automatic electric ignition and does not have a
pilot light. DO NOTATTEMPTTOLIGHT WITH A
MATCH.Burns may result from having your hand
in the vicinity of the burner when the automatic
ignition turns on.
• You mag wish to soften your laundered fabrics
or reduce the static electricitg in them bg using
a dryer-applied fabric softener or an anti-static
conditioner. We recommend you use either a fabric
softener in the wash cgcle, according to the
manufacturer's instructions for those products,
or trg a drger-added product for which the
manufacturer gives written assurance on the
package that their product can be safely used
in gour drger.Service or performance problems
caused bg use of these products are the
responsibility of the manufacturers of those
products and are not covered under the warrantg
to this appliance.
WHEN NOT USING YOURDRYER
• Grasp the plug firmly when disconnecting this
appliance to avoid damage to the cord while
pulling. Place the cord awag from traffic areas
so it will not be stepped on, tripped over or
subjected to damage.
• Do not attempt to repair or replaceany part of
this appliance or attempt ang servicing unless
specifically recommended in this Owner's Manual
or in published user-repairinstructions that you
understand and have the skillsto carry out.
• Before discarding a dryer, or removing it from
service, remove the dryer door to prevent children
from hiding inside.
• Do not tamper with controls.
READAND FOLLOWTHISSAFETYINFORMATION CAREFULLY.
SAVETHESEINSTRUCTIONS
Need help?
Do you have a question about the Profile DPSE810 and is the answer not in the manual?
Questions and answers