Important Safety Information; What To Do If You Smell Gas; Proper Installation - GE Profile DPSE810 Owner's Manual

IMPORTANT SAFETY INFORMATION.
READ ALL INSTRUCTIONS BEFORE USING.
ik WARNING!
For your safety, the information in this manual must be followed to minimize the
risk of fire or explosion, electric shock, or to prevent property damage, personal
injury, or death.
• Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or ang other appliance.
• Installation and service must be
performed by a qualified installer,
service agency or the gas supplier.
WHAT TO DO IF YOU SMELL GAS:
F_Do not try to light a match, or cigarette,
or turn on any gas or electrical
appliance.
[] Do not touch any electrical switch; do
not use any phone in your building.
[] Immediatelg call gour gas supplier from
a neighbor's phone. Follow the gas
supplier's instructions carefullg.
[] If gou cannot reach gour gas supplier,
call the fire department.
]Clear the room, building or area of
all occupants.
California Safe Drinking Water and Toxic Enforcement Act
This act requiresthe governor of California to publish a list of substancesknown to the state to cause cancer, birth
defects or other reproductive harm and requires businessesto warn customers of potential exposure to such
substances.
Gas appliances can cause minor exposure to four of these substances, namelg benzene, carbon monoxide,
formaldehgde and soot, caused primarilg bg the incomplete combustion of natural gas or LPfuels.
Properlg adjusted drgers will minimize incomplete combustion. Exposure to these substances can be minimized
further bg properlg venting the drger to the outdoors.
PROPERINSTALLATION
This dryer must be properly installed and located in accordance with the Installation Instructions
before it is used. If you did not receive on Installation Instructions sheet, you can receive one bg
visiting ge.com or bg calling 800.GE.CARES (800.432.2737).
• Properly ground dryer to conform with all
governing codes and ordinances. Follow details
in Installation Instructions.
• Install or store where it will not be exposed to
temperatures below freezing or exposed to
the weather
• Connect to a properlu rated, protected and sized
power supplu circuit to avoid electrical overload.
• Removeall sharp packing items and dispose of
all shipping materials properlu.
Exhaust/Ducting:
F_AII druers MUSTbe exhausted to the outside.
]Use onlu rigid metal 4" diameter ductwork
inside the dryer cabinet. Use onlu rigid metal
or flexible metal 4" diameter ductwork for
exhausting to the outside. USEOFPLASTICOR
OTHERCOMBUSTIBLE DUCTWORKCAN CAUSE
A FIRE.PUNCTURED DUCTWORKCAN CAUSEA
FIREIF IT COLLAPSES ORBECOMES OTHERWISE
RESTRICTED IN USEOR DURINGINSTALLATION.
For complete details,follow the Installation
Instructions.