Screw - Craftsman 320.16489 Operator's Manual

A
• IL WARNING: Do not use this tool for scaffolding or as a ladder. Make sure to
tighten the locking lever securely prior to use. Maximum capacity is 130 Ibs.
ASSEMBLING THE ROLLER STAND
Step 1
Installing the Stand Feet (Fig. 2)
1. Place the support-leg
assembly (A) upside down on
a flat surface.
2.
3.
Unscrew the locking pins (E)
from each of the two stand
feet (B).
With the slot facing up, place
the locking pin (E) through the
hole in the leg. Use screw (F),
attached on the stand foot,
and the locking pin to mount
the stand foot (B) on the left
support leg (A).
Fig. 2
B
A
4. Mount the other stand foot on the right support leg the same way.
16489 Manual_Revised_12 0525 Page 9