Replacing The Light Bulb; Preparing To Move - GE GTS12BBPALCC Owner's Manual And Installation Instructions

www.GEAppliances.com
Replacing the Light Bulb
Moving the control to OFFdoesnot removepower
to the hght circuit
The bulb is located behind the shield next
to the control.
0 Unplug the refl_igerator.
@ Remove the screw.
0 Push in near the top of the shield
and rotate down and out.
Replace the bulb with an appliance
bulb of the same or lower wattage
(40 X4_tt maximmn).
0 Insert the tabs at the bottom of the
light shield with the slots in the bulb
housing.
Rotate the shield up until the tabs at
the top of the shield pop into place
in the bulb housing.
0 Replace the screw.
Preparing lot Vacation
For ]o]_g vacatiom_s oi" abse]_ces, l"emove
fl_od amid m_pb_g d_e re{_'igeratox: Move
d_e co_]t_'o] to the OFF pos]tkm, m_d c]ea]_
d_e im]te_io_"wit]] a ba]Om_gsoda sob*t]o]_
of<me tab]espoom_ (15 m]) ot bakb_g soda
to <me q Ilal"t (1 ]itel") of _atel". l ,cave tbe
(]001S opeH.
Preparing to Move
Secm'e a]] loose items sl_(]_ as shelves amid
d]:_we]'s 1)_,tal fim_g, them secm'e])im_ place
Besum #_e refrigerator sta_s17_ anuprightposition
duringmovlT_g.