Advertisement
USING AS A PUSH CART_
IMPORTANT:
Leave the latch lock clevis pin in place
at all times while using the cart as a push cart. The
clevis pin is shown in figure 1 on page 4.
To convert the cart for push operation, remove the
4' long clevis pin and hairpin cotter which secure
the tongue in the towing posi_tion.(See drawing on
page 8.) Pivot the front tongue into the storage
position underneath the rear tongue and secure it
using the same clevis pin and hairpin cotter. (See
figure 5 on page 5.) Place the plastic cap over the
exposed end of the tongue.
For best handling, and to help prevent accidental
tipping, distribute the weight of the load evenly in
the cart.
Do not load more weightinto the push cart than
you can handle and control comfortably.
To dump material from the push cart, lift up on the
handle and tilt the cart forward. Be sure that the
latch mechanism on the tongue is locked and
secured with the clevis pin to prevent accidenta'
release of the latch.
CUSTOMER
RESPONSIBILITIES
•
Read and follow-the
maintenance schedule and the procedures listed in the maintenance
section.
MAINTENANCE
SCHEDULE
Fill in dates as you
completeregular service.
Check for loose{asteners
Check for worn or damaged parts
Check tire pressure
Lubricate
Clean
x
x
x
x
x
x
Service Dates
SCHEDULED
MAINTENANCE
•
Check for loose fasteners before each use.
•
check for worn or damaged parts before each use.
•
Keep tires filled to a recommended tire pressure of
12-14 Lbs.
&
CAUTION:
DO NOT inflate tires
beyond the maximum recommended
pressure printed on side of tire.
•
At the beginning of each season, using a light
- machine oil, lubricate the latch, the latch pivot bolt,
and the area of the axle where the draw bar tongue
pivots. See figure 11.
•
Grease or oil the wheel bearings periodically (at least
once each season). Use grease or 20 weight oil.
See figure 11.
STORAGE
•
Clean thoroughly before storing.
•
Remove any rust from painted surfaces and coat with
touch up paint.
•
Store in a dry area,
OIL
OIL
GREASE
FIGURE 11
CART SPECIFICATIONS
Tires:
16"x 4" Pneumatic
Axle:
3/4" Dia. Steel
Capacity:
Up to 650 Lbs. Max.
Approx.Sh.Wt.
55 Lbs.
9
Advertisement
