GE Monogram ZBD3500 Use And Care Manual page 8

Flashing Display Lights
Diskwasker
System Lights What It Means What To Do
i STATUS
_,, ._ENSING
i WASHING
| RINSING
| DRYING
| CLEAN
STATUS
SENSING
ASHING
II RINSING
| DRYING
| CLEAN
STATUS
| SENSING
_ WASHING
i DRY, NG
| CLEAN
PLUS A
BEEPING
SOUND
STATUS
| SENSING
| WASHING
_ RINSING
| CLEAN
PLUS A
BEEPING
SOUND
CLEANSENSOR Error
START/RESET pad
has been pressed
Control Error
Control Error
If the sensing light does not come on at the beginning of the NORMAL
or POTS PANS cycle, the CLEANSENSOR is not worldng. Call fbr sela:ice.
The dishwasher will continue to work without the CLEANSENSOR.
NOTE: This light will not stay on the entire cycle.
Allow dishwasher to drain and reset beff)re selecting a new cycle.
Press the START/RESET pad to turn offthe beeper. But the
rinsing light will continue to flash. If this continues, call fi_)r ser_4ce.
Press the START/RESET pad to turn offthe beeper and the
dishwasher will attempt to reset. Then restart the wash cycle.
If this error continues, call for sel_ice.
8