Hanging Vac On Storage Rack - Craftsman 113.179255 Owner's Manual

Assembly (continued)
3. Place Vac motor assembly onto Vac
drum assembly.
Vac Motor
Assembly
Vac Drum
4. Turn Vac drum lock into locked
position.
NOTE: There is a detent at the end of
travel in both the locked and unlocked
position. Continue to turn knob until it
"clicks" into the desired position.
You should feel and hear the "click".
Vac Motor\
Assembly_ Vac Drum
Lock
/
\
Hanging Vac on Storage Rack
1. Set the Vac on the floor near the stor-
age rack. Measure the distance from
center of storage rack to the closest
electrical outlet and add 18 inches.
_D8OU tlet _--
istance _
inches
2. Uncoil that amount of power cord from
the cord wrap. Drape the loose cord
over the top of the vacuum and down
the front.
3. Grasp the handle with one hand and
the bottom of the Vac drum at its front
foot with the other hand. Always lift the
Vac with both hands. Lift the Vac up to
the storage rack.
Cord Retainers /Rectangular
Opening
Cord Keeper
Upper Hook