GE CFCP1NIYASS Owner's Manual And Installation Instructions page 22

Installation Instructions
INSTALLING THE REFRIGERATOR
{cont.}
[_] REMOVE THE FRESH FOOD
DOOR HANDLE
(For placement in the installation location or
reversal of the handles - on some models)
Stainless steel Ion some models):
@ REMOVING
THEDOORHANDLE:
Loosenthe set
screws with the
3/32" Allen wrench
and remove
the handle. NOTE:
For Double Door
models follow the
same procedure on
the opposite door.
1
Badge
Mounting
Fasteners__
(appearance m ayvary)
Plastic handle (on some models}:
@ REMOVING THE DOORHANDLE: D epressthe tab on
the underside of the handle and slide the handle up
and off of the mounting fasteners.
Q REVERSING THEDOORHANDLE(on some models):
• Remove
the handle
mounting
fasteners with
a 1/4" Allen
wrench and
transfer the
handle
mounting
fasteners to
the right side.
• Removethe logo
badge. Mounting-
Fasteners
• Removeand
transfer the
plug button to
(appearance may vary)
the left side of the fresh food door.NOTE:Usea flat
plastic edge to prevent damaging the door. Remove
ang adhesive on the door with a mild detergent.
Removethe paper covering on the adhesive backing
on the logo badge prior to carefullg attaching the
badge to the door.
[] REMOVE THE FREEZER DOOR HANDLE
Stainless steel and plastic handles:
@ Loosenthe set screws located on the underside of
the handle with a 1/8" or 3/32" Allen wrench and
remove the handle.
NOTE:If the handle mounting fasteners need to be
tightened or removed,use a 1/4" Allen wrench.
22