GE CFCP1NIYASS Owner's Manual And Installation Instructions page 15

Trim kits and decorator panels. GEAppliances.com
For panel-required models
Read these instructions completelg and carefullg.
Before You Begin
Some models are equipped with trim kits that allow you to install door panels. You can order
pre-cut black or white decorator panels from GE Parts and Accessories, 800.626.2002, or you
can add wood panels to match your kitchen cabinets.
Panels less than 1/4" (6 mm) thick
When installing wood panels lessthan 1/4" (6 mm) thick, Sou need to create a filler panel, such as 1/8"
cardboard, that will fit between the face of the door and the wood panel. If you are installing the pre-cut
decorator panels, pre-cut filler panels are included in the kit. The combined thickness of the decorator or wood
panel and the filler panel should be 11/32" (8.7mm) with the panel itself being no larger than 1/4" (6 mm).
Panels1/4" thickor less
1/4" max
The handle and the top and bottom trim stand in front of the surface of the door,which requiresthat the filler
be smaller in length and width than the panel. Use the guidelines below and tape the filler onto the back of the
panel.
Filler_
Left Fresh Food Door
Right Fresh Food Door
Filler _
Panel
Filler-
Freezer Door
Panel
Panel _
15