GE CFCP1NIYASS Owner's Manual And Installation Instructions page 17

Installatio
I str cti
Refri erator
Models 21 and 25
Questions? Call 800.GE.CARES {800.432.2737) or visit our Website at: GEAppliances.com
In Canada, call 1.800.561.3344 or visit our Website at: www.GEAppliances.ca
BEFORE YOU BEGIN
Read these instructions completely and carefully.
•
IMPORTANT-
Savethese instructions
for local
inspector's use.
• IMPORTANT - Observe all
g overning
codes and
ordinances.
• Note to Installer - Be sure to leavethese instructions with
the Consumer.
• Note to Consumer- Keepthese instructions for future
reference.
• Skill level- Installation of this appliance requires basic
mechanical skills.
• Completion time- Refrigerator Installation
20 minutes
Water Line Installation
30 minutes
Anti-Tip Bracket Installation
20 minutes
• Proper installation is the responsibility of the installer.
• Product failure due to improper installation is not covered
under the Warranty.
PREPARATION
MOVING THE REFRIGERATOR INDOORS
If the refrigerator will not fit through a doorwag, the
refrigerator door and freezer drawer can be removed.
• To remove the refrigerator door,see Step 1 in the
Reversingthe Door Swing section.
• To remove the freezer drawer, see the Removingthe
FreezerDrawer section.
WATER SUPPLY TO THE ICEMAKER AND DISPENSER
(ON SOME MODELS}
If the refrigerator has an icemaker, it will have
to be connected to a cold water line.AGE water supply kit
(containing tubing, shut-off valve,fittings and instructions)is
available at extra cost from
your dealer,by visiting our Website at GEAppliences.com (in
Canada at www.GEAppliances.ca) or from Parts and
Accessories,800.626.2002 (InCanada 1.888.261.3055).
MATERIALS YOU MAY NEED
(notincluded)
LagBolts
Drill Bit Appropriatefor Anchors
AnchorSleeves
For Anti-Tip Bracket Mounted on CONCRETEFloors Only
TOOLS YOU MAY NEED
AdjustableWrench
3/8" and5/16" Socket
Ratchet/Driver
1/4" OuterDiameter
Compression N ut
andFerrule (sleeve)(icemal<er
modelsonly)
Phillips-Head Screwdriver
3/32", 1/8" and1/4" Allen
wrenches
1/8" Drill Bit and
Electricor HandDrill
Tapemeasure
Pencil
1/4" Nut Driver
Wire Cutters
Level
17