Changing Colorpanels - GE GSD4010 Owner's Manual

Changingcolor panels.
if you are redecorating, you can change your dishwasher's front
panel to match or blend with your new colors by flipping it over,
Each side of each panel is a different color, Youmay also paint
a panel with a color of your own choice.
A WARNING!
!iii!I W ear gtoves when handling door panels. Failure to do so can
cause serious cuts.
!_i5_ Do not operate dishwasher while changing panels.
Changing the Door Panel
i!_:_'_i! Take out trim screws on either side of the
i:,_':::_ dishwasher door. Remove the side trim,
_21! Slide the door' panel ouL (Careful--edges may
_ii be sharp..)
!!3_iTurn the door panel around and put the color you
_'::::.::_ want in front.
i:_i Replace the door panel, side trim and screws.
NOTE: Do not operate dishwasher while changing panels
or when bottom panel is removed.
;:!!i,i
!;;>:!7 _
!i::i:? !6
_ii::_:;i Remove the bottom panel attachment screws,
_21i_ Remove the top mounting screws,
_:_::ii 7:+'+:i Take. out the top trim screws and remove the top
_" - '-+_ trim.
{_ii Slide the color panel(s) up and
out
and put the
............ :"color you want in front.
i:_ Replace the top trim and screws,
[_:! Replace the entire ,-assembly by reversing the steps,