Preparing To Install The Refrigerator - GE GFSF6KEXCBB Owner's Manual And Installation Instructions

Installation
Instructions
Refrigerator
GE Model 26
Questions? Call 800.GE.CARES (800.432.2737) or visit our Website at: GEAppliances.com
In Canada, call 1.800.561.3344 or visit our Website at: www.GEAppliances.ca
BEFORE YOU BEGIN
Read these instructions completely and carefully.
• IMPORTANT - Save these instructions for l ocal
inspector's use.
•
IMPORTANT
-Observe all g overning codesand
ordinances.
• NotetoInstaller- Be sure toleave t hese instructions with
theConsumer.
• Note to Consumer- Keepthese instructions for future
reference.
• Skill level- Installation of this appliance requiresbasic
mechanical s kills.
• Completion time- Refrigerator Installation
20 minutes
Water Line Installation
30 minutes
• Proper installation is the responsibilitUof the installer.
• Product failure due to improper installation is not covered
under the Warrant U.
PREPARATION
MOVING THE REFRIGERATOR INDOORS
If the refrigerator will not fit through a doorway,
the refrigerator doors and freezer drawer can be removed.
• To remove the refrigerator door,see the Installing
the Rdrigerotor section.
• To remove the freezer drawer, see the Removing
the FreezerDrawer section.
WATER SUPPLY TO THE ICEMAKER AND DISPENSER
If the refrigerator has an icemaker, it will have to be
connected to a cold water line.AGE water supplUkit
(containing tubing, shutoff valve, fittings and instructions)
is available at extra cost from uour dealer,bUvisiting
our Website at GEApplionces.com (in Canada at
www.GEApplionces.ca) or from Parts and Accessories,
800.626.2002 (in Canada 1.800.661.1616).
15
TOOLS YOU MAY NEED
Adjustable Wrench
o@
1/4" Outer Diameter
Compression Nut
and Ferrule (sleeve)
3/32", 1/8", 3/16" and
4 mm Allen Wrenches
1/8" Drill Bit and
Electric or Hand Drill
3 :)})))'1
Pencil
Pliers
DIMENSIONS
70"1
I I
10 mm Socket
Ratchet/Driver
355/s ''
/
Phillips-Head Screwdriver
Flat-Head Screwdriver
Tope Measure
1/4" Nut Driver
Level
Case Depth w/o
Doo[s 291/s"_
Height from
floor to hinge
cover top 687/8''
Additional Dimensions