Craftsman 315.114840 Operator's Manual page 12

SWITCH
See Figure 3.
To turn your ddll ON, depress the switch trigger, To turn it
OFF, release the switch trigger,
VARIABLE S PEED
SWITCH TRIGGER FORWARD / REVERSE
SELECTOR Fig. 3
VARIABLE SPEED
This tool has a variable speed switch that delivers higher
speed and torque with increased trigger pressure. Speed
is controlled by the amount of switch trigger depression.
NOTE: You might hear a whistling or ringing noise from the
switch during use. Do not be concerned, this is a normal
part of the switch function.
TWO-SPEED GEAR TRAIN
See Figure 4.
Your drill has a two-speed gear train designed for dritling or
driving at LO (1) or HI (2) speeds. A slide switch is located
on top of your drill to select either LO (1) or HI (2) speed.
When using drill in the LO (1) speed range, speed will
decrease and unit will have more power and torque. When
using dril! in the HI (2) speed range, speed will increase
and unit will have less power and torque. Use LO (1) speed
for high power and torque applications and HI (2) speed for
fast drilling or driving applications.
TWO SPEED
GEARTRAIN (HFL0) L0
SPEED
SPEED
TO mNSTALL BATTERY PACK
See Figures 5 - 6.
[] Lock switch trigger on your drill by placing the direction
of rotation selector in center position.
[] Place battery pack in your drill. Align raised rib on
battery pack with groove inside drill.
[] Make sure the latches on each side of your battery
pack snap in place and battery pack is secured in dril!
before beginning operation.
CAUTION: When placing battery pack in your driI!,
be sure raised rib on battery pack aligns with groove
inside drill and latches snap into place properly.
Improper assembly of battery pack can cause
damage to internal components.
LATCHES
DEPRESS LATCHES TO
RELEASEBATTERYPACK
Fig. 5
TO REMOVE BATTERY PACK
See Figures 5 - 6.
[] Lock switch trigger on your dril! by placing the direction
of rotation selector in center position.
[] Locate latches on side of battery pack and depress to
release battery pack from your drill.
[] Remove battery pack from your dril!.
Fig. 4
12