Monogram ZISB360DRF Owner's Manual page 28

The Problem Solver
Built-l*_ I¢_qrigeralors
Questions ?
Use this
problem
solver, t
PROBLEM POSSIBLE CAUSE
WATER DISPENSER
DOES NOT WORK
ICE DISPENSER
DOES NOT WORK
WATER SPURTING
FROM DISPENSER
NO WATER OR ICE
PRODUCTION
CUBED ICE WAS
SELECTED BUT
CRUSHED ICE
WAS DISPENSED
FOOD IS NOT
THAWING/CHILLING
IN CLIMATE
CONTROL DRAWI]R
SELECT TEMP
F_TURE ON
CLIMATE CONTROL
DRAWER IS NOT
WORKING
X4'ater supi)ly line turned off, restricted or not connected. Call wmr
installer tot proper water SUl)ply line connection.
• _'ater filter clogged. Replace the filter or use the filter bypass plug.
• The CONTROL LOCK on the dispenser has been actiw_ted.
To unlock the dispenser, touch CONTROL LOCK tot 3 seconds.
• Air may be trapped in system. Press the dispenser arm tot at least
2 minutes.
• Ice bin improperly installed. See be stomg'e bi*_.
• Icemaker turned oil or water SUl)ply turned ott. Turn on icemaker
or water SUl)ply.
• Ice cubes are fl'ozen to the icemaker teeler arm. Remove cubes.
• hTegular ice clumps in storage bin. Break up with fingertip pressure
and discard remaining clumps.
• Freezer may be too warm. A(!just freezer control to a colder setting,
one position at a time, until clumps do not flwm.
• _,V_ter filter clogged. Replace the filter or use the filter bypass plug.
• The CONTROl, I,OCK on the dispenser has been activated. To
unlock the dispense_; touch CONTROl, I,OCK tot 3 seconds.
•Newlv installed filter cartridge. Run water ti'om the dispenser ti)r
3 minutes (about one and a halfgalhms).
• _'ater SUl)ply line turned otf, restricted or not connected. Call vom"
installer fi_r proper water SUl)ply line connection.
• _V_ter filter clogged. Replace the filter or use the filter bypass plug.
• I,ast setting was CRUSHED ICE. A few cubes were lett in the cHisher
fl'om the previous setting. This is normal.
• If continual crashed ice is dispensed while cubed ice is selected,
a_!just ice bin. See ](e
slol¥1_'(_
bill
• Packaging. Increase time or re-package in plastic.
• X_'rong weight selected. Select a larger weight.
• Item with high tat content. Select a larger weight.
• Not using the Climate Control tray. Place items on tray and allow
space in between items fl)r better air flow.
• Fresh Food temperature control is set at warmest setting.
This is normal. In order to minimize energy usage, the Select Temp
teature is disabled when the Fresh Food control is set at the
warmest setting.
CLIMATE CONTROL • Control I,ock feature is active. Press and hold the CONTROL LOCK
DRAWER CONTROLS pad on the Climate Control d_awe_ fo_ 3 seconds.
DO NOT WORK
28