Oventhermostat - GE JSS26 Owner's Manual

Adjust the oven thermostat--Bo it yourself!
You may find that your new oven cooks differently than the one it replaced. Use your new oven for a few
weeks to become more familiar with it. If you stiff think your new oven is too hot or too cold, you can adjust the
thermostat yourself.
Do not use thermometers, such as those found in grocery stores, to check the temperature setting of your oven.
These thermometers may vary 20-40 degrees.
Back of the OVEN TEMP knob.
Lower screw moves toward hotter
or cooler.
The lower screw moves toward
HOTTERto increase the temperature,
To Adjust the Thermostat
Pull tile OVEN TEMP knob offdle shaft,
look at tile back of die knob and note file
current setting befbre making any
a({jusmlent. Tile knob is facto U set xdth
tile mp screw direcdy under file pointer.
[7] Pull offthe OVEN TEMPknob.
[] Loosen both screws on back of
tile knob.
%
Hold bodl parts of tile knob as
shown in the illustrauon of the back
of die OVEN TEMP knob and turn so
tile lower screw moves in tile desired
direction. You will hear and feel tile
notches as you turn tile knob. Each
notch changes temperature about
10 ° Fahrenheit.
_-] Tighten tile screws.
Return tile OVEN TEMP knob to
tile oven.
Re-check o ven performance b eforemaking any
additional a djustments.
The lower screw moves toward
COOLER to decrease the temperature.
10