Control And Indicator Settings - GE WSLS1500 Owner's Manual & Installation Instructions

About the control and indicator settings,
ge.com
OEXTRA LARGE OSOAK
COLD C_ OLARGE _
HOT (_WARM OMEDIUM
OSMALL 0 RINSE
OE×TRA SMALL OSPIN
LOAD SENSING
_ POWER
I°wN'TEsf/START\\ @
I° °EL'DATES
I(_)1
L o
SPEED WASH _X_ .....
//
0
CUSTOM CYCLE
OPTIONS CYCLES
Before starting the washer:
• Load the laundry in the washer.
• Add the detergent and fabric softener to the dispenser drawer.
To Use Automatic One-Touch Washing
The LOAD SENSING feature automaticallg senses the size of gour load, fills with the appropriate amount
of water, and calculates the amount of wash time required to complete the cgcle.
NOTE: When using the LOAD SENSING feature, it is normal for the pulsator to rotate before water fills
in the tub.
To choose the automatic LOAD SENSING feature, press POWER ON/OFF.
The COLORSindicator light will light up automatically unless you have selected one of the other LOAD
SENSINGcycles such as WHITES, DELICATES,SPEED WASH,CUSTOM CYCLEor ULTRA CLEAN.
Then simply press
START/PAUSE.
To Choose Your Own Cycle Selections
POWER ON/OFF
Press the POWER ON/OFF button to turn on the control panel.
_ WASH OPTIONS
Choose the wash options you would like to include in the cycle. Press the WASH OPTIONSbutton
until all the options you want to include are lit. More than one option can be selected.
Soak+Wash Soak+Wash+Heavy Wash+Rinse Wash+Heavy Wash Rinse Wash Rinse Spin
Cycle
+Rinse+Spin Duty+Rinse+Spin +Spin Duty+Rinse+Spin +Rinse +Spin
Only Only Only
COLORS X X X X X X X X X
WHITES X X X X X X X X X
DELICATES X X X X X X X X X
SPEED X X X X X X X X X
WASH
CUSTOM
X X X X X X X X X
CYCLE
ULTRA X
CLEAN