Washer Connections For Portable Model - GE WSLS1500 Owner's Manual & Installation Instructions

Installation Instructions
WASHER CONNECTIONS FOR
ONE-FAUCET CONNECTIONS
Use the hose connector provided with the washer for a
one-faucet connection.
TO CONNECT THE WASHER:
m REMOVE THE UNI-COUPLE ® HOSE
FROM INSIDE THE WASHER BASKET
COLD Water
SupplyConnector
Connection
:tot
@
Water Filter
Uni-Coupler H ose
[_CONNECT TO WATER LINE
Attach the hose connector to the faucet adapter bg
pulling down on the locking collar while lifting up on
the connector until it snaps into place. Make sure the
water filter provided is in place.
Collar
HoseConnector
PORTABLE MODEL WSLP1500--
[_CONNECT TO VALVE INLET
Attach the COLD water supplg connector to the COLD
water valve inlet (color BLUE).Make sure the washer is
inside the connector before tightening.
[-4]TIC HTEN CONNECTOR
Tighten the connector, ensuring the threads are
aligned properly for tightest fit. Inspect for kinks
or binding of the hose.
NOTE:Do not remove the plastic cap from the HOT
water inlet for uni-coupler connections as leakage mag
occur,
[-5]CONNECT DRAIN HOSE
Attach the drain hose to the rear of the washer. Install
the clamp on the drain hose and tighten to prevent
leakage of water.
13