Control And Indicator Settings; Choosing Own Cycle Selections - GE WSLM1100 Owner's Manual & Installation Instructions

About the control and indicator settings.
PRESOAK
NORMAL
WASH
RINSE ONLY
SPIN ONLY
WASH
OPTIONS
Before starting the washer:
• Load the laundry in the washer.
• Add the detergent and fabric softener to the dispenser drawer.
• Add bleach (if needed) to the bleach dispenser.
To Use Automatic One-Touch Washing
START
PAUSE
The LOAD SENSING feature automatically senses the size of your load, fills with the appropriate
amount of water, and calculates the amount of wash time required to complete the cycle.
NOTE: When using the LOAD SENSING feature, it is normal for the agitator to rotate before water fills in
the tub.
To choose the automatic LOAD SENSING feature, press POWER ON/OFF .
The following indicators will light up automatically: NORMAL WASH, LOAD SENSING and COLD/COLD.
Then simply press START/PAUSE.
To Choose Your Own Cycle Selections
1
POWER ON/OFF
Press the POWER ON/OFF button to turn on the control panel.
2
WASH OPTIONS
Choose the wash options you would like to include in the cycle. Press the WASH OPTIONS
button until all the options you want to include are lit. More than one option can be selected.
PRESOAK For heavily soiled clothes that need to be soaked before washing. This option can be used as
RINSE ONLY This option gives one rinse cycle only. For example: Use this cycle when you need to remove
SPIN ONLY This option gives one spin cycle only. For example: Use this cycle when you need to remove
CLOTHES CARE CYCLE SELECTION
EXTRA LARGE
LARGE
MEDIUM
SMALL
LOAD
WASH
SIZE
CYCLE
part of the WASH CYCLE you select.
NORMAL This option is automatically selected when you press POWER ON/OFF .
WASH
excess detergent from your clothing.
excess water from your clothing.
COLORS
HOT/COLD
WHITES WARM/WARM
DELICATES
WARM/COLD
QUICK WASH COLD/COLD
LOAD SENSING
TEMP
WASH/RINSE
www.GEAppliances.com
TIME
REMAINING
MIN
POWER
START
ON/OFF
PAUSE
5