Advertisement
KNOW
THIS
TOOL
See Figure I.
Before attempting to use this tool, familiarize yourself with
all operating features and safety requirements.
KEYLESS
CHUCK
This toot has a keyless chuck that allows you to hand
tighten or release drill bit in the chuck jaws.
SWITCH
To turn this tool ON, depress the switch trigger. Release
switch trigger to turn your drill-driver OFF.
SWITCH
LOCK
The switch trigger can be locked in the OFF position. This
feature helps reduce the possibility of accidental start-
ing when not in use. Place forward/reverse selector in the
middle (center) position.
VARIABLE
SPEED
This tool has a variable speed switch that delivers higher
speed with increased trigger pressure. Speed is controlled
by the amount of switch trigger depression.
TWO
SPEED
GEAR
TRAIN
Your drill-driver has a two speed gear train designed for
drilling or driving at HI or LO speeds. A slide switch is
located on top of your drill to select either HI or LO speed.
DIRECTION
OF ROTATION
SELECTOR
(FORWARD/REVERSE)
This toot has a forward/reverse selector located above the
switch trigger.
WRIST
STRAP
A wrist strap is provided to reduce the chances of dropping
your toot. Place one hand through the wrist strap when
carrying tool.
BIT STORAGE
When not in use, bit(s) provided with this tool can be
placed in the storage area located on the top of the motor
housing.
9
Advertisement
