Product Specifications; Features - Craftsman 315.116920 Operator's Manual

PRODUCTSPECIFICATIONS
OrbitDiameter
......................................................... I116 in.
Size of Paper ....................................................... 113 Sheet
Paper "Pipe................................ Non-AdhesiveSandpaper
Adh_ve Sandpaper
No Load Speed ................................................ 12,000/mIn.
Input ................................ 120V, 60 Hz, AC only,2.0 Ampe
Net Weight.................................................................. 4 Ibs.
_cuum hose adapter ........................................... 1-1/4 in.
FRONT
HANDLE
REARHANDLE
DUSTBAG
SWITCH
PAPER CLAMP
VACUUM HOSE ADAPTER
PLATEN
CUSHION OFF ON
Fig. 1
KNOW YOUR SANDER
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
The sander is suitable for sanding with coarse, medium,
and fine grit sandpaper. It will produce a fine, scratch-frae
finish when used to sand with the grain on wood surfaces.
It has also been designed so that sanding flush to corners
is possible.
SWITCH
The sander has a oonvenienfiylocated sealed elide switch
to keep out dust for longerlife.
PAPER CLAMP
The sander has two paper clamps deigned to secure
standard sandpaper to the platen.
CUSHION
The cushionof the sander accepts both standard and
pressuresensitiveadhesive sandpaper.
DUST COLLECTION
The sander has a built-In dust collectionfor maximum
comfort and control, longer life,and to help keep the work
area clean. A 1-1/4 in. vacuum hose adapter is also pro-
vLdedfor attaching to a vacuum cleaner.