General Maintenance; Accessories - Craftsman 315.116920 Operator's Manual

WARNING: W hen servicing, useonlyidentical
Craftsman replacement parts. U se ofanyother p arts
may create a hazard o rcause product
damage.
A WARNING: Always wear safety goggles or safety
glasses with side shields during power tool operation
or when blowing dust. If operation is dusty, also wear
a dust mask.
GENERAL MAINTENANCE
Avoid using solventswhen elseningplastic parts. Most
pteaticaare susceptibleto damage from vadoca types of
commercial solvents and may be damaged by their use.
Use clean clothsto remove dirt, dust, oil, grease,etc.
A WARNING: Do not at any time let b_akefluids,
gasoline, petroleum-based products, penetrating
oils, etc., come in contact with plesttc parts, Chemi-
cals can damage, weaken or dea_rey plasticwhich
may resutt in serious personalinjury.
Electdc tools used on fiberglassmaterial,wallboard,
spacklingcompounds, or plaster are subject to accel-
ereted wear and poseibte premature faikJrs because the
fiberglass chipsand grlndlngsare highlyabrasiveto bear-
ings, brushes, commutators,etc. Consequently,we do not
recommended usingthis tool for extended work on these
types of materials. However, if you do work with any of
these materials, it is extrerne)yimportant to c]ean the tool
using compressed air.
LUBRICATION
All of the bearingsIn this tool are lubricatedwith a suffi-
cient amount of high grade lubricant for the life of the unit
under normal operating conditions.Therefore, no further
lubricationis required,
Only the peJ'tsshownon the parts list are intended to be
repairedor replaced by the customer,All other parts
shouldbe repfacad at a Sears Service Center,
The following recommendedaccessories are currentlyavailable at Sears retailstores:
• Non-Lcadlng Aluminum Oxide Adhesive Backed Sandpaper ........................................................... 3-2/3 in.x 7-1/8 In.
Fine, Fine, Medium, Coarse
• AluminumOxide Sheet Sandpaper ........................................................................................................... 3-2/3 in. x 9 in.
Fine, Medium, Coarse
_ WARNING: Currentattachments and accessoriesava_bte for use with this tool am listed above. Do not use any
attachments or accessories not recommended by the manufacturerof this tool. The use of attachments or acces-
soriesnot recommended can resuttIn serious personalinjury.
13