Craftsman 315.116920 Operator's Manual page 6

The following s ignal words and
meanings are intended to explain the levelsof riskassociated with this product.
SYMBOL SIGNAL MEANING
,_k DANGER:
Indicates an imminentlyhazardous situation, which, if not avoided, will
resultIn death or sedous Injury.
A WARNING:
Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury.
A CAUTION:
CAUTION:
Indicates a potentially hazardous sRuatlon,which, If not avoided, may
resultin minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result In
propertydamage.
SERVICE
Servic(ng requiresextreme care and knowredgeand
should be performed only by a qualified service tech-
nician. For servicewe suggest you mtum the product to
your nearestAUTHORIZED SERVICE CENTER for repair,
When servicing, use only identicalreplacement parts.
A WARNING: To avoid sadous personal injury,do
not attempt to use thIs productuntil you read
thoroughly and understand comp_etalythe
operator'smanual. Save this operator'smanual
and review frequentlyfor continuingsafe opera-
tion and instructingotherswho may use this
product.
A WARNING:
The operation of any power tool can resultin foreignobjects being thrown Intoyour eyes, which
O can result in severe eye dan_ge. Before beginningpower tool operation,always wear ssL=ety
gogglesor safety gtasseawith aide shieldsand a full face shieldwhen needed. We recommend
Wide Vision Safety Mask for usa over eyeglasses or standard safety glasseswith side shields.
Always use eye protection which is marked to comply with ANSI Z87.1.
SAVE THESE INSTRUCTIONS