Wheel - Craftsman 610.243551 Operator's Manual

f
Wheel/Axle Assembly
Spacer
Hitch Pin_
Hub Cap
Wheel
Hex Nut 5/16"
Bolt 5/16" x 3/4" Pan
Lock Washer 5/16'
Fiaure
5.
J
"Position Cart to add the Axle Holder. Use twelve 5/16" x 3/4" Pan Head Bolts, with 5/16" Lock Washers and
5/16" Hex Nuts.
* Next, slide Axle through Axle Holder and Drawbar, Center as shown. Add Axle Washer, PVC Spacer, Wheel,
and Axle Washer in that order to each end of Axle. Make sure Valve Stem faces towards the outside,
* Insert Cotter Pins through holes in Axle and lock in place by spreading tine ends, Snap on Hub Caps. Set Cart
upright. Slide Tail Gate into position.
* Make sure ALL bolts are tight at this time.
* Insert supplied hitch pin through Hitch Plate and Drawbar as shown. Add Safety Pin through Hitch Pin,
* Apply Craftsman decals as pictured on front cover of this manual,
THIS STEP REQUIRES
(12) - 5/16" x 3/4" Pan Head Bolt
1_2/ 5/16" LockWasher
5/16" Hex Nut
FOR MISSING PARTS, Call 1-800-652-23.21, Mon- Frl, 8 a.m. . 5p.m.E.S.T.
Page9