Craftsman 610.243551 Operator's Manual page 2

• Safety Instructions
• Tools Required for Assembly
• Maintenance / Storage
• Operation
• Assembly instructions
• Parts
• Warranty Information
• Perio_:Scally check all nuts and botts for
tightness.
• Check tires pressure regularly. 30 p.s.i, is
recommended.
• Grease Wheels at Axle for longer life.
• Keep Cart clean and dry to prevent rust
and corrosion.
= Store inside a clean, dry area when not in
use.
• Read this Manual before assembling
Cart.
• Never exceed load capacity of Cart -
1000 Ibs.
• When operating on slopes, use lowest
ground speed and limit load to 200 Ibs.
• Do not carry passengers in Cart.
• Do not use this Cart on public roads.
• Operate up and down slopes, never
across the face of slopes,
• Avoid sudden turns or maneuvers.
• With Cart Body attached to tractor,
remove Tailgate, and then pull up on
Cart Latch, Cart Body will tilt backwards,
dumping contents, Once empty, replace
Tailgate then pull Cart Body down until it
latches.
• Make sure you use the Safety Pin with
the Hitch Pin when attaching to the
Tractor.
• Follow all operating instructions in your
Tractors Owners manual.
liUm;] ih,-,ii--,ialel_Jn .-,iIqldll:ig] m_n mllali I
• 7/16" Wrench and / or Socket,
• V="Wrench and / or Socket.
• 9/16" Wrench and / or Socket.
• Large Blade Head Screw Driver,
• Vise Grip Wrench.
• Before beginning to assemble, layout
and identify all parts and hardware.
• Read all assembly instructions, pages
3 - 9 before beginning to assemble Cart.
• Some assembly may require two people.
FOR MISSING PARTS, Call 1-800-852-2321
Mon.- FRY,,O a.m. - 5p.m. E,S. T.
J
Page 2