"Rear Support Bar - Craftsman 610.243551 Operator's Manual

f
Rear Cart Assembly
5116"Hex N,,t----..
5/16" Lock WasherS"
5/16" Hel, Nut ,,_ \
Bolt 5/16" x 1" Pan _ _
Rear Support
;/16" x 3/4" Pan
--Slide Tailgate
into position.
Inset Cl
Bolt 5/16" x 3/4" Pan
Inset C Figure 2.
J
* Insert the Rear Support Bar (5) BEHIND the rear flanges of the assembled Body Halves. Use two 5/16" x 3/4"
Pan Head Bolts (25), 5/16" Lock Washers (23W), and 5/16" Hex Nuts (23N). IN CENTER TWO HOLES ONLY.
"Add Gate Retainers (7A & 8A), as shown, using the common holes to each side, with 5/16" X 3/4" Pan Head
Bolt (25), 5/16" Lock Washer (23W), and 5/16" Hex Nut (23N). Do not tighten until Tailgate is inserted,
* Insert Tail gate as shown in inset C1, Tighten Gate Retainer bolts.
THIS STEP REQUIRES
10) - 5/16" x 3/4" Pan Head Bolt
4) - 5/16" x 1" Pan Head Bolt
14) - 5/16" Lock Washer
14) _ 5/16" Hex Nut
FOR MISSING PARTS, Call 1-800-652-2321, Mon - Fr/, 8 a.m. - 5p.m.E.S.T.
I
Poge 6