Wrist Strap - Craftsman 315.274990 Owner's Manual

KNOW YOUR HAMMER DRILL
See Figure 1.
Before attempting to use any tool familiarize yourself
with all operating features and safety requirements.
_k WARNING: Ifany parts are missing, do not operate
tool until the missing parts are replaced. Failure to
do so could result in possible serious personal
injury.
WRIST STRAP
A wrist strap is provided to reduce the chances of
dropping your drill Place one hand through the wrist
strap when carrying tool.
AUXILIARY HANDLE
An auxiliary handle has been packed with your drillfor
ease of operation and to help prevent loss of control,
AUXIUARY
HANDLE
WINGSCREW
DEPTH GAGE ROD
A depth gage rod has been packed with your drillto
assist you in controlling the depth of drilled holes.
APPLICATIONS
(Use only for the purposes listed below)
• Hammer drilling in concrete and masonry.
• Ddlling in wood.
• Drilling in ceramics, plastics, fiberglass, and
laminates.
• Drilling in both ha_ and soft metals.
• Using driving accessories, such as driving screws
with screwdriver bits.
TWO-SPEED
swrrcH (H LO)
BRSTORAGE
DEPTH
GAGEROD
LEVEL
KEYLESS
CHUCK
MODE
SELECTOR
TORQUE
ADJUSTMENT RING
SELECTOR
(FORWARD / REVERSE)
BATTERY
PACK
-"_j SCREWDRIVER BITS
" WRISTSTRAP Fig. 1
6