Advertisement
CARTONCONTENTS (Loose Partsin Carton)
1, PolyTray
6, LatchStandBracket
2, Handle Tube
7, HitchBracket
3, Front T ongue
8, LegStandBracket
4. RearTongue
9. LatchLock
5, LatchStandPlate
10.LatchMount B rackets (2)
11. W heel S upport
12. A xle
13. W heels (2)
14.Handle Grip
11
i j
j Ji
j #
J
uU
CARTON CONTENTS
TOOLS REQUIRED
FOR ASSEMBLY
(1) Screwdriver
(1) PUiers
(2) 7/16" Wrenches
(2) 1/2" Wrenches
(2) 9/16" Wrenches
Remove the hardware pack and all loose parts
from the carton. Be sure the carton is empty before
discarding.
Lay out all the parts shown on pages 3 and 4.
NOTE: All 1/4" fiat washers should be assembled so that
they rest directly against the poly tray surface.
STEP
1
: (SEE FIGURE
1)
Assemble the latch lock between the latch mount
brackets using a 1/4" x 1" hex bolt (E) and a 1/4"
nylock nut (J), Tighten so that the latch lock can still
pivot. Attach the extension spring (N) to the latch lock
and the latch mount bracket.
insert the 3/8" x 1" clevis pin (H) through the holes
in the latch mount brackets and secure with an 1/8"
hairpin cotter (M).
LATCH MOUNT
BRACKETS
(E) 114"x 1"
HEX BOLT
(J) 1/4" NYLOCK NUT
(N) EXTENSmON
SPR{NG
/
(H) 3/8" x 1"
CLEVmS PIN
(M) 118" HAIRPmN
l
COTTER
LATCH LOCK
FIGURE 1
4
Advertisement
