Basic Fax Operation; Sending A Fax Using The Adf - Oki MC160n User Manual

Basic Fax Operation

This section contains basic information of fax transmission.
Documents with the following paper sizes can be faxed.
Maximum size: A4/Letter (when using the original glass)
Width: 140 to 216 mm
Length: 148 to 500 mm (when using the ADF)

Sending a Fax Using the ADF

If the ADF is used, original documents containing multiple pages can be auto-
matically scanned.
Do not load original documents that are bound together, for example, with
paper clips or staples.
Do not load more than 35 sheets; otherwise an original document miss-
feed or damage to the document or machine may occur.
If the original document is not loaded correctly, it may not be fed in
straight, or an original document misfeed or damage to the document
may occur.
Do not open the ADF cover while documents loaded into the ADF are
being scanned.
1
Press the Fax key to enter Fax mode.
If the initial mode (UTILITY - MACHINE SETTING - INITIAL MODE) is
set to FAX, this step can be skipped.
2
Make sure that there is no document on the original glass.
3
Put the document into the ADF doc-
ument feed tray face up.
4
Adjust the document guides to the document size.
40 Sending Faxes