Reporting - Oki MC160n User Manual

REPORTING

Specify report settings by selecting REPORTING in the UTILITY menu.
Activity Report
TX Result Report
RX Result Report
35 Control Panel and Configuration Menu
Settings OFF / ON
After every 60 transmissions/receptions, a report can
be printed to show the results of the transmissions/
receptions. Select whether the report is printed
automatically when the 60th transmission/reception
is reached.
Settings ON / ON(ERROR) / OFF
Select whether the report showing the result of a
transmission is printed automatically after the
transmission is finished.
ON: Prints the report after each transmission.
ON(ERROR): Prints the report after a trans-
mission only if an error occurred.
OFF: Does not print the report after each
transmission, even if an error has occurred.
The transmission result report is normally printed
after a broadcast transmission.
Settings ON / ON(ERROR) / OFF
Select whether the report showing the result of a
reception is printed automatically after the reception
is finished.
ON: Prints the report after each reception.
ON(ERROR): Prints the report after a recep-
tion only if an error occurred.
OFF: Does not print the report after each
reception, even if an error has occurred.