Frigidaire FRS124YW10 Use & Care Manual page 13

6" or more from
the ceiling 1. Installation plate
Indoor unit outline | ,/ _,,,
_- ....................................... _ ............................ _, or more
-'[I from the wall
_}"or more |I
0<'11:1
fromthew2 II '--'
I 1,97" - - _,97"
Refrigerant pipe I
! ,4", I_1t_1
lalt_l f_ | I Refrigerant pipe
hole(right) 02.56" }t_ ._._ hole (right) 02.56"
k_3,94,,..H k.m4,S8,_t
=21500Bfu's (A:39.69'1 B:12.40')
Fixing the Installation Plate
1. Install the installation plate
horizontally over the structural
parts on the wall using the spaces
indicated on the plate, as shown
in the figures above.
2. In the case of tiled, concrete or
similar walls, create 0.2"
diameter holes. Place anchorage
supports for the appropriate
assembly screws.
3. Fix the installation plate to the
wall with eight A type screws.
4. At all times securing to the wall
studs is recommended.
Drilling the Hole
,
Determine the position of the
hole for the pipes using the
installation plate and drill the
pipe hole so that it is tilted slightly
downward.
2. Always use a pipe cover with an
opening when drilling.
Attention
Fitthe Installation Plateand drill holes
in the wall according to the wall
structure and corresponding mounting
points on the installation plate
(Dimensions are in "mm" unless ..............................
otherwise stated).
installation plate
© @ @
Wall