Download Print this page

Frigidaire CFEF311GSC Use & Care Manual page 5

Coil surface elements with or without clock

Advertisement

Arranging
Oven Racks
To bake on a single rack, place the rack on position 2 or 3_ To bake on 2 racks,
place the racks on positions 1 & 3,
Recomended
Rack
Positions
for Broilinq,
Baking
& Roasting:
Food
Broiling meats, chicken or fish,
Cookies, cakes, pies, biscuits & muffins.
Frozen pies, angel food cake, yeast, bread, casseroles, small
cuts of meat or poultry.
Turkey, roast or ham.
Rack
Position
(See Broiling section)
2or3
1
1 or Roasting Shelf
Setdng CIock &Minute
Timer (some models;
Models
with no C_ock
if your model has no Clock or Minute Timer, clock settings are not required to operate your range. Please proceed to Setting
Surface & Oven Controls
in this Use & Care Manual.
HOUR
A
C
CLOCK
TO Set the 3 Button
Clock
(some
models)
MINUTE
TIMER
Note: The 3 button clock graphics shown vary by model.
To Set the 3 Button
Minute
Timer
1.
2.
.
When the range is first plugged in, or when the power supply to
the range has been interrupted, "12:00" will flash in the display
window.
1.
Slide switch C (CLOCK/TIMER)
to the CLOCK position.
2.
Push in and hold button A (HOUR) until the correct hour
appears in the display. (The numbers will only count fop,yard.)
3.
Push in and hold button B (MINUTE)
until the correct
minutes appear in the display.
Slide switch C (CLOCK/TIMER)
to the TIMER position, "0:59" (59 MINUTES) will appear in the display window. The timer
can be set for any amount of time from 1 minute to 1 hour and 59 minutes.
• To set a time more than 59 minutes, push in and release button A (HOUR). The display will show the maximum 1 hour
and 59 minutes. The time can now be adjusted down by pushing in and holding button B (MINUTE) until the correct
time appears in the display window.
• To set a time less than 59 minutes, push in and hold button B (MINUTE) until the correct minutes appear in the display.
(The minute timer will automatically start when the button is released.)
When the set time has passed, the control will display "0:00" and beep continuously. Slide switch C (CLOCK/TIMER)
to the CLOCK position to cancel the timer and return to the clock mode.

Advertisement

loading