Advertisement
To Start Delayed Self-Clean
Cycle (cont'd)
INSTRUCTIONS
PRESS
DISPLAY
Stopping
or interrupting
a Self-Cleaning
Cycle
If it becomes necessary to stop or interrupt a self-cleaning cycle
due to excessive smoke or fire in the oven:
1. Press _.
2.
Once the oven has cooled down for approximately
1 HOUR and
the "DOOR LOCKED" icon is no longer displayed, the oven
door can then be opened (Fig. 2-1).
Figure 2-1
The temperature in the oven has been pre-set at the factory. When first using the oven, be
sure to follow recipe times and temperatures.
If you think the oven is too hot or too cool, the
temperature in the oven can be adjusted. Before adjusting, test a recipe by using a
temperature setting that is higher or lower than the recommended temperature. The baking
results should help you to decide how much of an adjustment is needed.
INSTRUCTIONS
PRESS
To adjust
the oven temperature
higher:
1.
Press
I for 6 seconds (Fig. 1).
2.
To increase the temperature use the number pads to enter the
desired change. (Example30°F)(_
(_(Fig.
2). The
Q(_)
temperature may be increased upwards as much as 35°F.
3.
Press
I to accept the temperature change and the display
will return to the time of day (Fig. 3). Press _
to reject the
change if necessary.
To adjust
the oven temperature
lower:
1.
Press
) for 6 seconds (Fig. 4).
2.
To decrease the temperature use the number pads to enter the
desired change. (Example -30°F) Q
_
and then press
®®@
_(Fig. 5). The temperature
may be decreased
as much as
a5OF.
3.
Press
I to accept the temperature change and the display
will return to the time of day (Fig. 6). Press _
to reject the
@
change if necessary.
Note: The oven
temperature adjustments
made with this feature will
not change the Self-Clean
cycle temperature.
DISPLAY
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
28
Advertisement
