Craftsman 580.750900 Operator's Manual page 66

KNOWYOURPRESSURE WASHER
[_ Read the Operator'sManual and safety rules before operating your pressure washer.
Comparethe illustrations with your pressure washer to familiarize yourself with the locations of various controls and
adjustments. Savethis manual for future reference.
I--Wp
A - Spray Gun-- Controls the application of water onto
cleaning surface with trigger device. Includes trigger lock.
B - Accessory Tray -- Provides convenient storage for
accessories, such as gun, spray tips, etc.
C - Spray Tips -- Detergent, 0° and 25°: for various high
pressure cleaning applications.
D - High Pressure Hose-- Connectone end of hose to
water pump and the other end to spray gun.
E - Recoil Starter -- Used for starting the engine manually.
F - Air Filter -- Protects engine by filtering dust and debris
out of intake air.
G - Throttle Lever -- Sets engine in starting mode for recoil
starter and stops a running engine.
H - Primer Bulb-- Preparesa cold engine for starting.
J - Fuel Tank -- Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
I( - HighPressure Outlet -- Connectionfor high pressure hose.
L - Water Inlet -- Connection for garden hose.
M - Pump -- Develops high pressure.
N - Automatic Cool DownSystem -- Cycles water through
pump when water reaches 125°-155°F. Warm water wiii
discharge from pump onto ground. This system prevents
internal pump damage.
P - Engine identification-- Provides model, type and code
of engine. Pleasehave these readily available if calling for
assistance.
Q - Bottle Bracket-- Cleaning solution bottle fits in wire
form bracket here. Concentrate bottle not included.
R - Oil Fill/Dipstick- Check,add and drain engine oil here.
S - Project Pro@ PerfectMWMSiphon -- Mixes concentrate
with pressure washer spray.
T - Warning/Operating Instructions Tag --identifies hazards
and proper procedureto start/stop pressure washer.
U - Nozzle Extension with QuickConnect -- Allows you to
switch between three different spray tips.
Items Not Shown:
Identification Label (near rear of base plate) -- Provides
model and serial number of pressure washer. Pleasehave
these readily available if calling for assistance.