Seting Delayed Timed Bake - Frigidaire DGGF3054KFG Use & Care Manual

To program oven for delay start time and
to shut-off automatically
The delay start feature allows you to set a start and end
time to the cooking process. Prior to setting a delay start,
be sure the time of day is set correctly. If the delay start
needs to be set more than 12 hours in advance (12-24
hours), the control must first be programmed for 24 hour
display mode. See "Setting 12 or 24 hour display modes"
section.
When the set bake time runs out:
1. "END" will appear in the display window and the oven
will shut-off automatically (See Fig. 2).
2. The control will beep 3 times every 30 seconds as a
reminder until the cancel key pad is pressed.
FOOD POISONING HAZARD. Do not let food sit for more
than one hour before or after cooking. Doing so can result
in food poisoning or sickness.
To program the oven for a delay start and to shut-off
automatically (example for baking at 375°F for 50
minutes and starting at 5:30):
Step Press
1. Press bake time. bake
time
2. Enter5Omintues. 5 0
Fig. 1 Fig. 2
After the delay start feature has activated and started
the cooking process, press the bake time pad to display
the bake time remaining.
The delay start feature may be used with the convect
or convect convert cooking features. Bake time will
not operate when using the broil feature.
3. Press start, start
4. Press delay start (See Fig. 1). delay
start
5. Enter530.
5 3 0
6. Press and hold start, start
7. Enter375.
3 7 5
8. Press start, start