Table of Contents
Advertisement
To program
oven
for delay
start
time
and
to shut=off
automatically
The delay start feature allows you to set a start and end
time to the cooking process. Prior to setting a delay start,
be sure the time of day is set correctly. If the delay start
needs to be set more than 12 hours in advance (12-24
hours), the control must first be programmed for 24 hour
display mode. See "Setting 12 or 24 hour display modes"
section.
FOOD POISONING
HAZARD, Do notlet f oodsit f or more
than one hour before or after cooking. Doing so can result
in food poisoning or sickness.
When the set bake time runs out:
1.
"END" will appear in the display window and the oven
will shut-off automatically (See Fig. 2).
2.
The control will beep 3 times every 30 seconds as a
reminder until the cancel key pad is pressed.
Fig, 1
Fig, 2
To program the oven for a delay start and to shut=off
automatically
(example
for baking
at 375°F
for 50
minutes and starting at 5:30):
Step
Press
I. Press bake time.
bake
time
2.
Enter SOmintues.
5
0
After the delay start
feature has activated and started
the cooking process, press the bake time pad to display
the bake time remaining.
The delay start
feature may be used with the convect
or convect
convert
cooking features. Bake time will
not operate when using the broil feature.
3.
Press start,
start
4.
Press delay
start (See Fig. 1).
detay
start
5. Enter530.
5 3 0
6.
Press and hold start,
start
7.
Enter375.
3 7 5
8. Pressstart,
start
Advertisement
Table of Contents
