Advertisement
CAUTION:
DO NOT ASSEMBLE
WiTH
POWER
RAKE
PLUGGED
iNTO
A
POWER SOURCE
STEP 3:
(SEE FIGURE 3)
Attach the long end of each of the middle handle
tubes to the lower handle tube using 2 carriage bolts
(D) and wing knobs (A).
STEP 1 : (SEE FIGURE 1)
Attach the handle attachment brackets to each side
of the lower handle tube.
SHORT
END
/
LONG
END
\
D
FIGURE 1
FIGURE 3
STEP 2:
(SEE FIGURE 2)
Fasten the handle attachment brackets and lower
handle tube to the Power Rake housing using two
carriage bolts (D), washers (E) and wing knobs (A).
E
A
FIGURE 2
STEP 4:
(SEE FIGURE 4)
Slide the cord minder (6) onto the right middle handle
tube.
FIGURE 4
4
Call 1-866-576-8388
for missing parts or assembly help
DO NOT RETURN TO STORE
Advertisement
